U-Boot verified boot bypass vulnerabilities (CVE-2018-18439, CVE-2018-18440)
Security advisory: U-Boot verified boot bypass ============================================== The Universal Boot Loader - U-Boot [1] verified boot feature allows cryptographic authentication of signed kernel images, before their execution. This feature is essential in maintaining a full chain of trust on systems which are secure booted by means of an hardware anchor. Multiple techniques have been identified that allow to execute arbitrary code, within a running U-Boot instance, by means of externally provided unauthenticated data. All such techniques spawn from the lack of memory allocation protection within the U-Boot architecture, which results in several means of providing excessively large images during the boot process. Some implementers might find the following issues as an intrinsic characteristic of the U-Boot memory model, and consequently a mere aspect of correct U-Boot configuration and command restrictions. However in our opinion the inability of U-Boot to protect itself when loading binaries is an unexpected result of non trivial understanding, particularly important to emphasize in trusted boot scenarios. This advisory details two specific techniques that allow to exploit U-Boot lack of memory allocation restrictions, with the most severe case also detailing a workaround to mitigate the issue. It must be emphasized that cases detailed in the next sections only represent two possible occurrences of such architectural limitation, other U-Boot image loading functions are extremely likely to suffer from the same validation issues. To a certain extent the identified issues are similar to one of the findings reported as CVE-2018-1000205 [2], however they concern different functions which in some cases are at a lower level, therefore earlier in the boot image loading stage. Again all such issues are a symptom of the same core architectural limitation, being the lack of memory allocation constraints for received images. It is highly recommended, for implementers of trusted boot schemes, to review use of all U-Boot booting/loading commands, and not merely the two specific ones involved in the findings below, to apply limitations (where applicable/possible) to the size of loaded images in relation to the available RAM. It should also be emphasized that any trusted boot scheme must also rely on an appropriate lockdown of all possibilities for interactive consoles, by boot process interruption or failure, to ever be prompted. U-Boot insufficient boundary checks in filesystem image load ------------------------------------------------------------ The U-Boot bootloader supports kernel loading from a variety of filesystem formats, through the `load` command or its filesystem specific equivalents (e.g. `ext2load`, `ext4load`, `fatload`, etc.) These commands do not protect system memory from being overwritten when loading files of a length that exceeds the boundaries of the relocated U-Boot memory region, filled with the loaded file starting from the passed `addr` variable. Therefore an excessively large boot image, saved on the filesystem, can be crafted to overwrite all U-Boot static and runtime memory segments, and in general all device addressable memory starting from the `addr` load address argument. The memory overwrite can directly lead to arbitrary code execution, fully controlled by the contents of the loaded image. When verified boot is implemented, the issue allows to bypass its intended validation as the memory overwrite happens before any validation can take place. The following example illustrates the issue, triggered with a 129MB file on a machine with 128MB or RAM: ``` U-Boot 2018.09-rc1 (Oct 10 2018 - 10:52:54 +0200) DRAM: 128 MiB Flash: 128 MiB MMC: MMC: 0 # print memory information => bdinfo arch_number = 0x000008E0 boot_params = 0x60002000 DRAM bank = 0x00000000 -> start = 0x60000000 -> size = 0x08000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x00000004 eth0name = smc911x-0 ethaddr = 52:54:00:12:34:56 current eth = smc911x-0 ip_addr = <NULL> baudrate = 38400 bps TLB addr = 0x67FF0000 relocaddr = 0x67F96000 reloc off = 0x07796000 irq_sp = 0x67EF5EE0 sp start = 0x67EF5ED0 # load large file => ext2load mmc 0 0x60000000 fitimage.itb # In this specific example U-Boot falls in an infinite loop, results vary # depending on the test case and filesystem/device driver used. A debugging # session demonstrates memory being overwritten: (gdb) p gd $28 = (volatile gd_t *) 0x67ef5ef8 (gdb) p *gd $27 = {bd = 0x7f7f7f7f, flags = 2139062143, baudrate = 2139062143, ... } (gdb) x/300x 0x67ef5ef8 0x67ef5ef8: 0x7f7f7f7f 0x7f7f7f7f 0x7f7f7f7f 0x7f7f7f7f ``` It can be seen that memory address belonging to U-Boot data segments, in this specific case the global data structure `gd`, is overwritten with payload originating from `fitimage.itb` (filled with `0x7f7f7f7f`). ### Impact Arbitrary code execution can be achieved within a U-Boot instance by means of unauthenticated binary images, loaded through the `load` command or its filesystem specific equivalents. It should be emphasized that all load commands are likely to be affected by the same underlying root cause of this vulnerability. ### Workaround The optional `bytes` argument can be passed to all load commands to restrict the maximum size of the retrieved data. The issue can be therefore mitigated by passing a `bytes` argument with a value consistent with the U-Boot memory regions mapping and size. U-Boot insufficient boundary checks in network image boot --------------------------------------------------------- The U-Boot bootloader supports kernel loading from a variety of network sources, such as TFTP via the `tftpboot` command. This command does not protect system memory from being overwritten when loading files of a length that exceeds the boundaries of the relocated U-Boot memory region, filled with the loaded file starting from the passed `loadAddr` variable. Therefore an excessively large boot image, served over TFTP, can be crafted to overwrite all U-Boot static and runtime memory segments, and in general all device addressable memory starting from the `loadAddr` load address argument. The memory overwrite can directly lead to arbitrary code execution, fully controlled by the contents of the loaded image. When verified boot is implemented, the issue allows to bypass its intended validation as the memory overwrite happens before any validation can take place. The issue can be exploited by several means: - An excessively large crafted boot image file is parsed by the `tftp_handler` function which lacks any size checks, allowing the memory overwrite. - A malicious server can manipulate TFTP packet sequence numbers to store downloaded file chunks at arbitrary memory locations, given that the sequence number is directly used by the `tftp_handler` function to calculate the destination address for downloaded file chunks. Additionally the `store_block` function, used to store downloaded file chunks in memory, when invoked by `tftp_handler` with a `tftp_cur_block` value of 0, triggers an unchecked integer underflow. This allows to potentially erase memory located before the `loadAddr` when a packet is sent with a null, following at least one valid packet. The following example illustrates the issue, triggered with a 129MB file on a machine with 128MB or RAM: ``` U-Boot 2018.09-rc1 (Oct 10 2018 - 10:52:54 +0200) DRAM: 128 MiB Flash: 128 MiB MMC: MMC: 0 # print memory information => bdinfo arch_number = 0x000008E0 boot_params = 0x60002000 DRAM bank = 0x00000000 -> start = 0x60000000 -> size = 0x08000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x00000004 eth0name = smc911x-0 ethaddr = 52:54:00:12:34:56 current eth = smc911x-0 ip_addr = <NULL> baudrate = 38400 bps TLB addr = 0x67FF0000 relocaddr = 0x67F96000 reloc off = 0x07796000 irq_sp = 0x67EF5EE0 sp start = 0x67EF5ED0 # configure environment => setenv loadaddr 0x60000000 => dhcp smc911x: MAC 52:54:00:12:34:56 smc911x: detected LAN9118 controller smc911x: phy initialized smc911x: MAC 52:54:00:12:34:56 BOOTP broadcast 1 DHCP client bound to address 10.0.0.20 (1022 ms) Using smc911x-0 device TFTP from server 10.0.0.1; our IP address is 10.0.0.20 Filename 'fitimage.bin'. Load address: 0x60000000 Loading: ################################################################# ... #################################### R00=7f7f7f7f R01=67fedf6e R02=00000000 R03=7f7f7f7f R04=7f7f7f7f R05=7f7f7f7f R06=7f7f7f7f R07=7f7f7f7f R08=7f7f7f7f R09=7f7f7f7f R10=0000d677 R11=67fef670 R12=00000000 R13=67ef5cd0 R14=02427f7f R15=7f7f7f7e PSR=400001f3 -Z-- T S svc32 ``` It can be seen that the program counter (PC, r15) is set to an address originating from `fitimage.itb` (filled with `0x7f7f7f7f`), as the result of the U-Boot memory overwrite. ### Impact Arbitrary code execution can be achieved within a U-Boot instance by means of unauthenticated binary images, passed through TFTP and loaded through the `tftpboot` command, or by a malicious TFTP server capable of sending arbitrary response packets. It should be emphasized that all network boot commands are likely to be affected by the same underlying root cause of this vulnerability. ### Workaround The `tftpboot` command lacks any optional argument to restrict the maximum size of downloaded images, therefore the only workaround at this time is to avoid using this command on environments that require trusted boot. Affected version ---------------- All released U-Boot versions, at the time of this advisory release, are believed to be vulnerable. All tests have been performed against U-Boot version 2018.09-rc1. Credit ------ Vulnerabilities discovered and reported by the Inverse Path team at F-Secure, in collaboration with Quarkslab. CVE --- CVE-2018-18440: U-Boot insufficient boundary checks in filesystem image load CVE-2018-18439: U-Boot insufficient boundary checks in network image boot Timeline -------- 2018-10-05: network boot finding identified during internal security audit by Inverse Path team at F-Secure in collaboration with Quarkslab. 2018-10-10: filesystem load finding identified during internal security audit by Inverse Path team at F-Secure. 2018-10-12: vulnerability reported by Inverse Path team at F-Secure to U-Boot core maintainer and Google security, embargo set to 2018-11-02. 2018-10-16: Google closes ticket reporting that ChromeOS is not affected due to their specific environment customizations. 2018-10-17: CVE IDs requested to MITRE and assigned. 2018-11-02: advisory release. References ---------- [1] https://www.denx.de/wiki/U-Boot [2] https://lists.denx.de/pipermail/u-boot/2018-June/330487.html Permalink --------- https://github.com/inversepath/usbarmory/blob/master/software/secure_boot/Security_Advisory-Ref_IPVR2018-0001.txt
*** This is a Security Bloggers Network syndicated blog from SecurityOrb.com authored by Kellep Charles. Read the original post at: https://www.securityorb.com/vulnerability/u-boot-verified-boot-bypass-vulnerabilities-cve-2018-18439-cve-2018-18440/